|
| TM+玻璃熔滴与铂合金的润湿性研究 |
| Research on Wettability of TM+ Glass Melt Drip on Platinum Alloys |
| 投稿时间：2017-05-09 修订日期：2017-06-09 |
| DOI：10.14093/j.cnki.cn10-1132/d.2018.01.006 |
| 中文关键词: 金属材料 玻纤漏板 铂铑合金 TM+玻璃 润湿性 接触角 |
| 英文关键词: metal materials fiberglass bushing Pt-Rh alloy TM+ glass wettability contact angle |
| 基金项目:重庆市重点产业共性关键技术创新项目(cstc2015zdcy-ztzx50004)。 |
|
| 摘要点击次数: 2850 |
| 全文下载次数: 2859 |
| 中文摘要: |
| 用高温高真空润湿测试系统测定了TM+玻璃熔滴与铂合金基材的接触角。结果表明，在1150~1350℃，熔滴与基材之间的接触角随温度升高而急剧下降；2 种基材(Pt-20Rh 和ZGS-(Pt-20Rh))的润湿转变临界温度分别为1253℃和1273℃；温度高于1300℃，采用锆弥散强化的ZGS-(Pt-20Rh)基材的接触角小于Pt-20Rh，ZGS-(Pt-20Rh)在高温下润湿性的增强不利于玻璃纤维的拉丝成型。 |
| 英文摘要: |
| The contact angle between TM+ glass melt drop and platinum alloys was investigated by sessile drop method in high temperature and high vacuum wetting testing system. The results indicate that the contact angle of melt drop and base material is sharply dropped with temperature in the rang of 1150 ~ 1350℃. The wetting critical transition temperature is 1253℃ and 1273℃ for Pt-20Rh and ZGS-(Pt-20Rh) respectively. The contact angle for zirconium dispersion strengthened ZGS-(Pt-20Rh) is less than that of Pt-20Rh when the temperature is higher than 1300℃. The wettability enhancement of ZGS-(Pt-20Rh) at high temperature is detrimental to glass fiber drawing and forming. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
