文章摘要
响应曲面法优化水溶液氯化溶解纯铑粉
Optimization of Aqueous Chlorination Solubilized Pure Rhodium Powder by Response Surface Methodology
投稿时间:2018-06-23  
DOI:
中文关键词: 水溶液氯化  铑粉  溶解率  响应曲面法
英文关键词: aqueous chlorination  rhodium powder  dissolution rate  response surface methodology
基金项目:国家重点研发计划(2016YFB0101309)、云南省应用基础研究计划重点项目(2012FA006)。
作者单位E-mail
杨金富 昆明贵研催化剂有限责任公司昆明 650106 jinfu.yang@spmcatalyst.com 
毕向光 昆明贵研催化剂有限责任公司昆明 650106  
王火印 昆明贵研催化剂有限责任公司昆明 650106 huoyin.wang@spmcatalyst.com 
李权 昆明贵研催化剂有限责任公司昆明 650106  
卢峰 昆明贵研催化剂有限责任公司昆明 650106  
赵云昆 昆明贵研催化剂有限责任公司昆明 650106  
摘要点击次数: 1758
全文下载次数: 1779
中文摘要:
      利用响应曲面法中心组合设计(CCD)对水溶液氯化溶解纯铑粉的工艺参数进行优化,分别选取反应温度、酸度、时间、氧化剂用量四个主要影响因子,模拟得到二次多项式回归方程的预测模型。结果表明,铑的溶解率影响因子的显著顺序为:温度>时间>酸度>氧化剂用量,优化后的工艺条件为:反应温度90 min,温度90℃,氧化剂/铑粉质量比6.25,酸度8.7 mol/L,铑粉溶解率的预测值为97.13%,实际值为96.58%,响应曲面法优化模型准确有效。
英文摘要:
      The central composite rotatable design (CCD) of response surface methodology(RSM) was used to optimize the process parameters of aqueous chlorination solubilized pure rhodium powder. Four main influencing factors including reaction temperature, acidity, time and oxidant dosage were selected to simulate the prediction model of quadratic polynomial regression equation. Results show that significant impact factor of the dissolution of rhodium in order as: temperature > time> acidity> oxidant dosage, Optimized to get the best process conditions as follows: reaction temperature was 90 min, temperature was 90℃, dosage of oxidant/rhodium powder mass ratio of 6.25, acidity was 8.7 mol/L. The predicted value of the dissolution rate was 97.13%, the actual value was 96.58%, the result indicating that the response surface optimization model was accurate and effective.
查看全文   查看/发表评论  下载PDF阅读器
关闭