文章摘要
NiPdCrBSi合金的钎焊组织与性能研究
Study on Brazing Microstructure and Properties of NiPdCrBSi Alloy
投稿时间:2019-10-11  
DOI:
中文关键词: 金属材料  NiPdCrBSi合金  形貌组织  铺展性  润湿性  钎焊界面
英文关键词: metal materials  NiPdCrBSi alloy  microstructures  spread ability  wettability  brazing interface
基金项目:国家重点研发计划(2017YFB0305700)、国家自然科学基金(U1602275,U1602271);云南省重大科技专项(2018ZE011,2018ZE012,2018ZE022,2018ZE026)
作者单位E-mail
杜静 中国航发沈阳黎明航空发动机有限责任公司沈阳 110043  
柳青 昆明贵金属研究所 稀贵金属综合利用新技术国家重点实验室昆明 650106  
高勤琴 昆明贵金属研究所 稀贵金属综合利用新技术国家重点实验室昆明 650106  
魏明霞 中国航发沈阳黎明航空发动机有限责任公司沈阳 110043  
谢明 昆明贵金属研究所 稀贵金属综合利用新技术国家重点实验室昆明 650106 powder@ipm.com.cn 
陈永泰 昆明贵金属研究所 稀贵金属综合利用新技术国家重点实验室昆明 650106  
杨有才 昆明贵金属研究所 稀贵金属综合利用新技术国家重点实验室昆明 650106  
摘要点击次数: 2134
全文下载次数: 1908
中文摘要:
      以真空雾化制粉技术制备了NiPdCrBSi合金粉末,采用差热分析(DTA)、扫描电镜(SEM)、金相显微镜(OM)和真空钎焊等技术,对所得合金粉末的形貌、熔化特性,以及在不锈钢上的焊接铺展组织进行研究,并对钎焊界面组织进行分析表征。结果表明,NiPdCrBSi合金钎料在不锈钢上的润湿铺展性良好,所形成的焊接界面层的润湿机理,主要以扩散机制为主导,增强了合金的焊接性能和可靠性。
英文摘要:
      The NiPdCrBSi alloy powders were prepared by vacuum atomization technology. The morphology, melting characteristics and welding spreading structure of NiPdCrBSi alloy powder were studied by means of differential thermal analysis (DTA), scanning electron microscopy (SEM), metallographic microscopy (OM) and vacuum brazing, and the brazing interface was also studied. The results showed that the wettability and spreading of NiPdCrBSi alloy brazing filler metal on stainless steel was good, and the wettability mechanism of the welded interface layer formed was mainly dominated by diffusion mechanism, which enhanced the weldability and reliability of the alloy.
查看全文   查看/发表评论  下载PDF阅读器
关闭