|
Ag-6Cu-1Zn-0.5Ni合金变形行为的高通量研究 |
High Throughput Study on Deformation Behavior of Ag-6Cu-1Zn-0.5Ni Alloy |
投稿时间:2019-09-30 |
DOI: |
中文关键词: 金属材料 Ag-6Cu-1Zn-0.5Ni合金 高通量 显微组织 硬度 |
英文关键词: metal materials Ag-6Cu-1Zn-0.5Ni alloy high throughput microstructure hardness |
基金项目:国家重点研发计划(2017YFB0305700)、国家自然科学基金(U1602271, U1602275)、云南省科技计划项目(2018ZE011, 2018ZE012, 2018ZE022, 2018ZE026, 2015IB012, 2016HB026) |
|
摘要点击次数: 2287 |
全文下载次数: 2030 |
中文摘要: |
对Ag-6Cu-1Zn-0.5Ni合金楔形试样进行轧制,获得了变形量从33%-80%连续变化的高通量实验样品,并对合金显微组织和性能进行了表征。结果表明,合金塑性变形后,晶粒发生变形,沿形变方向被压扁并拉长,最后全部转变为纤维组织。合金内晶粒从不均匀变形逐渐转变为均匀变形,晶界为滑移带的发射源。随着变形量的增大了,出现了交叉滑移和平行四边形的亚结构。硬度的变化分为4个阶段,呈台阶形式上升,其强化机制为固溶强化和位错强化的共同作用的结果。 |
英文摘要: |
The high throughput experimental samples of Ag-6Cu-1Zn-0.5Ni alloy with the deformation amount was between 33% ~ 80% was prepared by rolling the wedge specimen, then the microstructure and properties of the alloy were characterized. The results show that the grains are deformed, squashed and elongated along the deformation direction after plastic deformation, and finally transformed into fiber structure. The grain gradually changed from uneven deformation to uniform deformation, and the grain boundary was the emission source of the slip bands. The sub-structure of cross-slip and parallelogram appeared as the deformation increases. The change of hardness was divided into four stages and hardness raised in the form of steps, the strengthening mechanism is the result of the combined action of solid solution strengthening and dislocation strengthening. |
查看全文
查看/发表评论 下载PDF阅读器 |
关闭 |