文章摘要
从失效丙烷脱氢催化剂中回收铂的除炭工艺研究
Decarbonization on Recovery of Platinum from Spent Propane Dehydrogenation Catalyst
投稿时间:2019-08-27  
DOI:
中文关键词: 有色金属冶金  丙烷脱氢催化剂  回收铂  α-Al2O3载体
英文关键词: nonferrous metallurgy  propane dehydrogenation catalyst  recovery of platinum  α-Al2O3 carrier
基金项目:
作者单位E-mail
张锦云 昆明贵金属研究所昆明 650106
贵研资源易门有限公司云南 易门 651100 
1017612462@qq.com 
谭文进 贵研资源易门有限公司云南 易门 651100 345294118@qq.com 
李春辉 贵研资源易门有限公司云南 易门 651100  
摘要点击次数: 2182
全文下载次数: 1904
中文摘要:
      丙烷脱氢失效铂基催化剂的种类主要以炭含量划分为低炭和高炭型,回收其中的铂,重点在于炭的脱除。生产和实验数据表明,低炭型丙烷脱氢催化剂在预处理500℃,处理时间4 h,酸比1:1.7,回收率达到98%;高炭型丙烷脱氢催化剂预处理900℃,通氧流量6~13 L/min,热处理时间6 h,6段动态热处理,直收率达到90%,有待进一步提高。
英文摘要:
      The main types of platinum based catalysts for propane dehydrogenation are classified into low carbon and high carbon types based on carbon content. The production and experimental data show that the recovery of low carbon propane dehydrogenation catalyst is 98% at 500℃ for 4 hours, acid ratio 1:1.7, and that of high carbon propane dehydrogenation catalyst at 900℃, oxygen flow rate 6~13 L/ min, heat treatment time 6 hours, 6-stage dynamic heat treatment, the direct yield is 90%, which needs to be further improved.
查看全文   查看/发表评论  下载PDF阅读器
关闭