Abstract
Au-12Ge钎料箔材的工艺集成制备与组织演化研究
Study on process integration preparation and microstructure evolution of Au-12Ge solder foil
投稿时间:2021-08-09  
DOI:
中文关键词: 金属材料  钎料  金锗合金  箔材  一体式加工  组织演化
英文关键词: metal materials  solder  Au-Ge alloy  foil  integrated processing  microstructure evolution
基金项目:国家自然科学基金项目(51801179);云南省重大科技专项(2019ZE001-1,202002AB080001-6,202203ZA080001);云南省高层次人才引进计划项目(C619300A023);云南省教育厅科学研究基金项目(2022J0004);云南大学教改项目(2021Y35)
作者单位E-mail
张顺猛* 云南大学 材料与能源学院 材料基因工程研究中心昆明 650500 mszhang@ynu.edu.cn 
熊凯 云南大学 材料与能源学院 材料基因工程研究中心昆明 650500  
朱振永 云南大学 材料与能源学院 材料基因工程研究中心昆明 650500  
许思勇 云南大学 材料与能源学院 材料基因工程研究中心昆明 650500  
李传维 上海交通大学 材料科学与工程学院上海 200240  
毛勇 云南大学 材料与能源学院 材料基因工程研究中心昆明 650500  
摘要点击次数: 1224
全文下载次数: 957
中文摘要:
      Au-12Ge共晶合金传统生产工艺操作复杂,重复性差,成品率低。本文采用一体式加工工艺,制备出厚度为20 μm的箔材钎料。采用扫描电子显微镜(SEM)研究Au-12Ge共晶合金铸态、不同轧制变形量的显微组织形貌,采用同步热分析仪(DSC)研究Au-12Ge箔材的共晶转变温度。结果表明,Au-12Ge共晶合金的铸态组织为Au相和Ge相,随着热轧变形量的增大,Au-12Ge共晶合金组织Ge相经历细化分散到粗化过程,粗大的Ge晶粒内部包裹软质的Au相;Au-12Ge共晶合金箔材的熔点为361℃。
英文摘要:
      The traditional production process of Au-12Ge eutectic alloy is complicated, with poor repeatability and low yield. In this paper, an integrated processing technology is used to prepare Au-12Ge foil brazing material with a thickness of 20 μm. The microstructure and composition of as-cast and different rolling deformations of Au-12Ge alloy were studied by scanning electron microscopy (SEM). The eutectic transition temperature of Au-12Ge foil was tested by a synchronous thermal analyzer (DSC). The results show that the as-cast microstructure of Au-12Ge eutectic alloy consists of Au phase and Ge phase. With the increase of hot rolling deformation, the Ge phase of Au-12Ge eutectic alloy undergoes the process of refining, dispersing to coarsening, and the soft Au phase is encapsulated within the coarse Ge grains. The melting point of Au-12Ge eutectic alloy foil is 361℃.
查看全文   查看/发表评论  下载PDF阅读器
关闭