|
| PdW20合金组织与性能研究 |
| Research on Microstructure and Properties of PdW20 Alloys |
| 投稿时间：2012-10-17 |
| DOI： |
| 中文关键词: 金属材料 精密电阻 PdW20合金 铸态组织 特殊凝固 短程有序(K效应) |
| 英文关键词: metalmaterials precision resistor PdW20 alloy cast structure the special solidification short-range ordering (K-effect) |
| 基金项目: |
|
| 摘要点击次数: 4261 |
| 全文下载次数: 3915 |
| 中文摘要: |
| 研究了3种不同凝固方法制备的精密电阻PdW20合金铸态组织结构，扫描电镜和电子探针分析表明:采用特殊凝固方法制备的合金铸锭避免了常规水冷铜模方法制备铸锭出现的穿晶组织和铸锭晶界间存在的微裂纹，改善了合金的加工性能；同时避免了定向凝固方法造成的铸锭头尾成分不均匀性的缺陷。讨论了合金短程有序(K效应)与组织、性能的关系。 |
| 英文摘要: |
| The cast structures of precision resistor PdW20 alloy prepared using three different solidification methods were studied. The scanning electron microscopy and electron probe microanalyses (EPMA) showed that the workability of PdW20 alloys prepared by the special solidification method was improved. By using the method the trans-crystallization structure and microcracks among grain boundary produced from water-cooled copper mold could be suppressed, and at the same time it could avoid the defects of different composition in ingot head and end prepared by the directional solidification method. The relationship between the structure and properties of PdW20 alloy with the short-range ordering (K-effect) was discussed. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
