文章摘要
含金硫酸渣硫酸盐化焙烧-氯化浸金研究
Processing of Gold-containing Slag from Sulfuric Acid Production Using Sulfatizing Roasting Followed by Chlorine Leaching
投稿时间:2013-08-17  
DOI:
中文关键词: 冶金技术  含金硫酸渣  氯盐浸出  浸出率
英文关键词: metallurgy  gold-containing slag from sulfuric acid production  chlorine leaching  leaching rate
基金项目:
作者单位E-mail
尤大海 武汉理工大学 资源与环境工程学院武汉 430070 ydh0015@126.com 
张亚辉 武汉理工大学 资源与环境工程学院武汉 430070 yahui.zhang@whut.edu.cn 
隆 岗 中矿金业股份有限公司山东 招远 265401  
涂 博 武汉理工大学 资源与环境工程学院武汉 430070  
黄俊玮 武汉理工大学 资源与环境工程学院武汉 430070  
摘要点击次数: 4455
全文下载次数: 4766
中文摘要:
      针对难处理含金硫酸渣进行了硫酸盐化焙烧-氯化(氯酸钠-氯盐)浸出试验研究,考察了氯酸钠用量、氯化钠用量、液固比、浸出时间、浸出温度、焙烧预处理等因素对金浸出率的影响。研究结果表明,在优化的试验条件:氯化钠用量为80 kg/t,氯酸钠100 kg/t,反应温度80℃,液固比为3,反应时间为4 h下,处理该含金硫酸渣可以得到91.44%的金浸出率。
英文摘要:
      Sulfatizing roasting and chlorine leaching of refractory gold-containing slag from sulfuric acid production have been investigated. The effects of sodium chlorate dosage, sodium chloride dosage, liquid-solid ratio, leaching time, reaction temperature and pretreatment condition on leaching recovery of gold have been studied. The results show that the leaching rate can reach as high as 91.44% under the optimum conditions that the addition of NaClO3 is 100 kg/t, the addition of NaCl is 80 kg/t, the liquid-solid ratio is 3, the leaching temperature is 80℃ and the leaching time is 4.0 h.
查看全文   查看/发表评论  下载PDF阅读器
关闭