文章摘要
低品位微细粒金矿浮选精矿的处理工艺研究
Processing Technology on Low-grade Microgranular Gold Mine and Its Flotation Concentrate
投稿时间:2014-06-06  
DOI:
中文关键词: 有色金属冶金  低品位微细粒金矿  高压氧化  氰化浸出  浸出率  渣率
英文关键词: nonferrous metallurgy  low-grade microgranular gold mine  high-pressure oxidation  cyanide leaching  leaching rate  residue rate
基金项目:
作者单位E-mail
谢营邦 广西冶金研究院南宁 530023 13907713469@139.com 
曾 睿 广西冶金研究院南宁 530023  
罗思强 广西冶金研究院南宁 530023  
詹海鸿 广西冶金研究院南宁 530023  
容 蓉 广西冶金研究院南宁 530023  
摘要点击次数: 4244
全文下载次数: 4407
中文摘要:
      针对低品位微细粒金矿中金的赋存特点,对其浮选精矿进行高压氧化-氰化浸出工艺处理。重点考察了高压氧化预处理过程中的温度、液固比和氧化时间对预处理效果的影响。预处理渣再磨后氰化浸出,金的浸出率(对浮选精矿)为94.30%,渣率为10.88%。
英文摘要:
      Considering the occurrence features of gold in low-grade microgranular gold mine, high- pressure oxidation-cyanide leaching process was used for treating its flotation concentrate. The effects of temperature, liquid-solid ratio and oxidation time, during the process of high-pressure oxidation, on pre- treatment were investigated crucially. The pretreatment slag was ground and leached with sodium cyanide. The leaching rate of gold, for flotation concentrate, was 94.30%, and the residue rate was only 10.88%.
查看全文   查看/发表评论  下载PDF阅读器
关闭