高频燃烧红外吸收法测定纯银及银合金中微量的碳硫

沈善问

文章摘要

高频燃烧红外吸收法测定纯银及银合金中微量的碳硫

Determination of Carbon and Sulfur in Pure Silver and Silver Alloy by High Frequency Combustion-infrared Absorption Spectrometry

投稿时间：2015-01-15

DOI：

中文关键词: 分析化学高频燃烧-红外吸收银及银合金碳硫

英文关键词: analytical chemistry high frequency combustion-infrared absorption spectrometry silver and silver alloy carbon sulfur

基金项目:

作者	单位
沈善问	贵研铂业股份有限公司，昆明 650106

摘要点击次数: 3930

全文下载次数: 4292

中文摘要:

采用氯酸钾作助熔剂，经过高频燃烧后，用红外碳硫仪测定纯银及银基合金中的微量碳、硫，测定范围碳:0.005%~0.12%，硫:0.005%~0.099%。方法准确度高，相对标准偏差、加标回收率分别为碳:3.3%~10.9%、91%~120%；硫:2.8%~10%、91%~120%。

英文摘要:

The content of carbon and sulfur in pure silver and silver alloy was analyzed by using infrared absorption, and the related analytical conditions were established. Under the given analytical conditions, the method has advantages of being accurate and time-saving. Satisfactory analytical results can be obtained for the samples containing carbon in the range of 0.005%~0.12% and sulfur in the range of 0.005%~0.099%. The relative standard deviation, standard addition recovery rate is 3.3%~10.9%, 91%~ 120% for carbon, and 2.8%~10%, 91%~120% for sulfur, respectively.

查看全文查看/发表评论下载PDF阅读器

关闭