|
| 从环氧乙烷用失效催化剂中回收银 |
| Recovering Silver from Spent Catalyst Used in Production of Ethylene Oxide |
| 投稿时间：2015-08-04 |
| DOI： |
| 中文关键词: 冶金技术 失效催化剂 银 回收 流态化 |
| 英文关键词: metallurgy spent catalyst silver recovery fluidization |
| 基金项目:国家高技术研究发展计划(863计划)项目(2012AA063203)、云南省省院省校科技合作项目(2013IB020) |
|
| 摘要点击次数: 3393 |
| 全文下载次数: 3880 |
| 中文摘要: |
| 采用流态化浸出技术研究了从环氧乙烷用失效银催化剂中银的工艺。考察了流化状态、硝酸用量、反应时间等参数对银浸出效果的影响，得到了最佳工艺条件。采用自制流化态溶解装置，使废催化剂处于流动翻滚状态，硝酸用量为理论用量的1.2倍，反应时间不低于1 h，银的浸出率可达到99.88%。浸出液氯化沉淀后采用传统方法精炼提纯，得到99.95%纯度的银。 |
| 英文摘要: |
| Forthe recovery of silver from spent catalyst used in ethane oxide industry, fluidization technique was introduced to accelerate the leaching of silver from spent catalyst. The influencing parameters on the leaching, such as flow state and nitric acid dosage and reaction time, were studied in order to obtain the optimum process conditions. A 99.88% of the silver leaching rate could be achieved within 1 h when the spent catalyst was in fluid state in a special reactor containing a nitric acid amount 1.2 times as the theoretical one. The silver in the leaching solution was purified by conventional AgCl precipitating method to reach a purity of 99.95%. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
