Abstract
含金硫酸渣硫酸盐化焙烧-氯化浸金研究
Processing of Gold-containing Slag from Sulfuric Acid Production Using Sulfatizing Roasting Followed by Chlorine Leaching
Received:August 17, 2013  
DOI:
中文关键词: 冶金技术  含金硫酸渣  氯盐浸出  浸出率
英文关键词: metallurgy  gold-containing slag from sulfuric acid production  chlorine leaching  leaching rate
基金项目:
Author NameAffiliationE-mail
YOU Dahai College of Resources and Environmental Engineering, Wuhan University of Technology, Wuhan 430070, China ydh0015@126.com 
ZHANG Yahui College of Resources and Environmental Engineering, Wuhan University of Technology, Wuhan 430070, China yahui.zhang@whut.edu.cn 
LONG Gang Zhongkuang Gold Industry Co.Ltd., Zhaoyuan 265401, Shandong, China  
TU Bo College of Resources and Environmental Engineering, Wuhan University of Technology, Wuhan 430070, China  
HUANG Junwei College of Resources and Environmental Engineering, Wuhan University of Technology, Wuhan 430070, China  
Hits: 4458
Download times: 4766
中文摘要:
      针对难处理含金硫酸渣进行了硫酸盐化焙烧-氯化(氯酸钠-氯盐)浸出试验研究,考察了氯酸钠用量、氯化钠用量、液固比、浸出时间、浸出温度、焙烧预处理等因素对金浸出率的影响。研究结果表明,在优化的试验条件:氯化钠用量为80 kg/t,氯酸钠100 kg/t,反应温度80℃,液固比为3,反应时间为4 h下,处理该含金硫酸渣可以得到91.44%的金浸出率。
英文摘要:
      Sulfatizing roasting and chlorine leaching of refractory gold-containing slag from sulfuric acid production have been investigated. The effects of sodium chlorate dosage, sodium chloride dosage, liquid-solid ratio, leaching time, reaction temperature and pretreatment condition on leaching recovery of gold have been studied. The results show that the leaching rate can reach as high as 91.44% under the optimum conditions that the addition of NaClO3 is 100 kg/t, the addition of NaCl is 80 kg/t, the liquid-solid ratio is 3, the leaching temperature is 80℃ and the leaching time is 4.0 h.
View Full Text   View/Add Comment  Download reader
Close