|
| 电子工业用贵金属中低温脆性钎料研究进展 |
| Research Progress on Precious Metals Medium-low Temperature Brittle Filler Metals for Electronic Industry |
| Received:October 13, 2013 |
| DOI： |
| 中文关键词: 金属材料 贵金属 中低温钎料 制备工艺 |
| 英文关键词: metal materials precious metals medium-low temperature filler metals processing technologies |
| 基金项目:云南省自然科学基金项目(2011010207)。 |
| Author Name | Affiliation | E-mail | | ZHANG Liguang | State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals,Sino-Platinum Metals Co., Ltd., Kunming Institute of Precious Metals, Kunming 650106, China | zhangliguang0824@163.com | | XU Kun | State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals,Sino-Platinum Metals Co., Ltd., Kunming Institute of Precious Metals, Kunming 650106, China | xukun@ipm.com.cn | | ZHAO Ming | State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals,Sino-Platinum Metals Co., Ltd., Kunming Institute of Precious Metals, Kunming 650106, China | | | LIU Yi | State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals,Sino-Platinum Metals Co., Ltd., Kunming Institute of Precious Metals, Kunming 650106, China | | | LI Wei | State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals,Sino-Platinum Metals Co., Ltd., Kunming Institute of Precious Metals, Kunming 650106, China | | | LUO Ximing | State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals,Sino-Platinum Metals Co., Ltd., Kunming Institute of Precious Metals, Kunming 650106, China | | | XU Yongtao | Avic Liyang Aero-Enging Co.Ltd., Pingba 561102, Guizhou, China | | | Ao Bin | Avic Liyang Aero-Enging Co.Ltd., Pingba 561102, Guizhou, China | |
|
| Hits: 4126 |
| Download times: 4412 |
| 中文摘要: |
| 概述了电子工业用贵金属中低温脆性钎料的最新研究进展，讨论了钎料合金的微观组织对加工性能的影响。发现大部分贵金属中低温钎料含有脆性相，使其难以加工成型。介绍了这类脆性钎料的加工成形工艺，提出了贵金属中低温钎料的研究方向。 |
| 英文摘要: |
| The latest research progress on precious metals medium-low temperature brittle filler metals for electronic industry was summarized. And the effects of microstructure of solder alloys on processing performance were discussed. It was found that most of precious metals medium-low temperature filler metals contain brittle phases which make them difficult to process. In addition, the processing technologies of this kind of brittle filler metals were introduced and the research directions of precious metals medium-low temperature filler metals were pointed out. |
|
View Full Text
View/Add Comment Download reader |
| Close |
|
|
|