Abstract
Ag-Cu-Ce合金的电阻率研究
The Study on the Resistivity of Ag-Cu-Ce Alloys
Received:July 31, 2014  
DOI:
中文关键词: 金属材料  银铜铈合金  银铈合金  电阻率
英文关键词: metal materials  silver-copper-cerium alloys  silver-cerium alloys  resistivity
基金项目:云南省科研院所技术开发专项(2006KFZX-13)、2009年国家科技部科研院所技术开发专项。
Author NameAffiliationE-mail
LIU Qing State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals,Sino-Platinum Metals Co. Ltd., Kunming 650106, China  
WANG Jian State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals,Sino-Platinum Metals Co. Ltd., Kunming 650106, China  
WU Haijun State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals,Sino-Platinum Metals Co. Ltd., Kunming 650106, China  
LI Qiang State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals,Sino-Platinum Metals Co. Ltd., Kunming 650106, China  
HE Xiaoyan State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals,Sino-Platinum Metals Co. Ltd., Kunming 650106, China  
LU Shaoping State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals,Sino-Platinum Metals Co. Ltd., Kunming 650106, China lusp@ipm.com.cn 
Hits: 3569
Download times: 3864
中文摘要:
      利用扫描电镜、双臂电桥法分析了加工变形量和退火温度对Ag-Cu-Ce合金电阻率的影响。结果表明:Ag-Cu-Ce合金的电阻率随着加工变形量的增加而增大,Cu的加入使Ag-Ce合金电阻率稍有升高;当退火温度大于600℃时,Ag-Cu-Ce合金的电阻率急剧升高,电性能变差。
英文摘要:
      The effect of machining deformation and annealing temperature on the resistivity of Ag-Cu-Ce alloys was studied by scanning electron microscopic (SEM) and double bridge method. The results indicated that the resistivity of Ag-Cu-Ce alloys increased with increasing of machining deformation, the addition of Cu in Ag-Ce alloys increased its resistivity slightly, and the resistivity of Ag-Cu-Ce alloys improved sharply when the annealing temperature is higher than 600℃,then the electrical properties became worse.
View Full Text   View/Add Comment  Download reader
Close