Abstract
退火温度对AgCuIn/QSn复合焊料界面影响
The Influence of Annealing Temperature on the AgCuIn/QSn Composite Brazing Composite
Received:August 13, 2014  
DOI:
中文关键词: 复合材料  复合  退火  界面
英文关键词: composite material  composite  annealing  interface
基金项目:
Author NameAffiliation
MAO Duan State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals,Sino-Platinum Metals Co. Ltd., Kunming 650106, China 
WANG Jian State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals,Sino-Platinum Metals Co. Ltd., Kunming 650106, China 
WU Qingwei State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals,Sino-Platinum Metals Co. Ltd., Kunming 650106, China 
CHEN Wen State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals,Sino-Platinum Metals Co. Ltd., Kunming 650106, China 
WANG Guangqing State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals,Sino-Platinum Metals Co. Ltd., Kunming 650106, China 
CHEN Guohua State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals,Sino-Platinum Metals Co. Ltd., Kunming 650106, China 
LI Linxiu State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals,Sino-Platinum Metals Co. Ltd., Kunming 650106, China 
Hits: 3816
Download times: 3826
中文摘要:
      采用室温固相复合技术制备AgCuIn/QSn复合焊料,选用不同退火温度对AgCuIn/QSn复合焊料进行扩散退火,利用拉力试验机、扫描电子显微镜考察热处理温度对AgCuIn/QSn复合焊料界面的影响。结果表明,退火工艺为550℃/6 h时复合界面结合效果最佳。
英文摘要:
      The AgCuIn/QSn composite brazing was made by room temperature solid phase composite technology, and annealed at different heat treatment temperatures. The influence of annealing temperature on the AgCuIn/QSn composite brazing composite interface was studied by tensile testing instrument and scanning electron microscopy. The results showed that the best composite interface was got at 550℃/ 6 h annealing.
View Full Text   View/Add Comment  Download reader
Close