Abstract
高砷难处理硫精矿氰化浸出提银实验研究
Study on the Extraction of Silver from High Arsenic Refractory Sulfur Concentrate
Received:January 22, 2015  
DOI:
中文关键词: 有色金属冶金  高砷  难处理  硫精矿  氰化浸出  提银
英文关键词: nonferrous metals metallurgy  high arsenic  refractory  sulfur concentrate  cyanidation leaching  extraction of silver
基金项目:
Author NameAffiliationE-mail
HU Yangjia State Key Laboratory of Mineral Processing, Beijing General Research Institute of Mining &
Metallurgy, Beijing 100160, China 
ajia216@163.com 
HE Zheng State Key Laboratory of Mineral Processing, Beijing General Research Institute of Mining &
Metallurgy, Beijing 100160, China 
 
ZHAO Zhiqiang State Key Laboratory of Mineral Processing, Beijing General Research Institute of Mining &
Metallurgy, Beijing 100160, China 
 
LUO Sigang State Key Laboratory of Mineral Processing, Beijing General Research Institute of Mining &
Metallurgy, Beijing 100160, China 
 
Hits: 4006
Download times: 3935
中文摘要:
      某硫精矿中的银矿物嵌布粒度非常细小,包裹于硫化物中的银约占50.46%,属于难处理高砷含银硫精矿。采用细磨后化学预处理氰化浸出,银浸出率仍然低于80%;硫精矿经氧化焙烧后,As、S的脱除率都达到90%以上,但银浸出率却较低;对该含银硫精矿添加钠盐焙烧预处理,再采用常规氰化法浸出,银浸出率显著提高,达到85.15%,同时氰化钠耗量降低至2.0 kg/t。
英文摘要:
      The silver bearing sulfur concentrate is refractory one due to its high arsenic and its fine silver minerals. The cyanidation leaching rate of silver was low (<80%) despite the sulfur concentrate was treated by fine grinding and chemical reagent. After oxidation roasting, the removal rates of As and S in concentrate reached 90% above, however the leaching rate was still low. The leaching rate was significantly improved when the concentrate was roasted by adding NaXY. The leaching rate can reach 85.15% and the consumption of NaCN reduced to 2.0 kg/t.
View Full Text   View/Add Comment  Download reader
Close