|
| 介孔碳载铂催化剂的制备、表征及催化性能评价 |
| Synthesis, Characterization and Performance Assessment of Pt/Mesoporous Carbon Catalysts |
| Received:November 30, 2015 |
| DOI： |
| 中文关键词: 催化化学 铂催化剂 介孔碳 萘 加氢 |
| 英文关键词: catalytic chemistry platinum catalyst mesoporous carbon naphthalene hydrogenation |
| 基金项目:辽宁省科学技术厅项目(2013020097)。 |
|
| Hits: 2842 |
| Download times: 3147 |
| 中文摘要: |
| 以介孔碳材料CMK-3为载体，采用乙二醇还原的方法进行金属铂负载，制备了不同铂含量(1.5%、2.0%和3%)的催化剂。XRD、BET、TEM的表征结果表明，催化剂保持了CMK-3高度有序的介孔结构，铂粒子的平均粒径在5 nm左右，均匀地分散在CMK-3孔道内。用萘的加氢反应对此催化剂的性能进行评价，获得的最优条件为:使用Pt(2%)/CMK催化剂，在280℃、氢气压力3 MPa、氢油比500、质量空速2 h-1的条件下，萘的转化率和生成十氢萘的选择性均大于98%。此催化剂对降低石油产品中芳烃具有潜在应用价值。 |
| 英文摘要: |
| Different Pt loading (1.5%, 2.0%, 3.0%) catalysts with ordered mesoporous carbon CMK-3 as supports were prepared by ethylene glycol reduction method. The XRD, BET and TEM results show that the prepared catalysts possess highly ordered mesoporous structure of initial CMK-3, and have uniform dispersion of Pt particle in the pore of CMK-3, the Pt particle size is about 5 nm. The catalytic activity of the catalysts were evaluated by naphthalene hydrogenation. The optimum reaction conditions are as follows: reaction temperature 280℃, reaction H2 pressure 3 MPa, hydrogen/oil ratio 500 and mass space velocity 2 h-1. Both the naphthalene conversion and decahydronaphthalene selectivity of Pt(2%)/CMK-3 are all over 98%。This catalyst has the potential applied value in removing arene from petroleum products. |
|
View Full Text
View/Add Comment Download reader |
| Close |