|
连铸工艺参数对AgCu4Ni0.5铸坯组织的影响 |
Influence of Continuous Casting Parameters on Microstructure of AgCu4Ni0.5 Casting Alloy |
Received:June 12, 2016 |
DOI: |
中文关键词: 连铸参数 凝固组织 AgCu4Ni0.5合金 铸坯 |
英文关键词: continuous casting parameters solidification structure AgCu4Ni0.5 alloy casting billet |
基金项目: |
Author Name | Affiliation | E-mail | ZHANG Guoquan | State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals,Kunming Institute of Precious Metals, Kunming 650106, China | zhanggq@ipm.com.cn | WU Xiaofei | State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals,Kunming Institute of Precious Metals, Kunming 650106, China | wxf@ipm.com.cn | ZHAO Jun | State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals,Kunming Institute of Precious Metals, Kunming 650106, China | | ZHANG Chunrong | State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals,Kunming Institute of Precious Metals, Kunming 650106, China | | WANG Haiyan | State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals,Kunming Institute of Precious Metals, Kunming 650106, China | | FAN Yongliang | State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals,Kunming Institute of Precious Metals, Kunming 650106, China | | LU Jianmin | State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals,Kunming Institute of Precious Metals, Kunming 650106, China | |
|
Hits: 2387 |
Download times: 2629 |
中文摘要: |
利用金相分析方法研究了连铸参数对AgCu4Ni0.5合金凝固组织的影响。研究表明,在溶液温度和连铸速度较低时,合金的固液界面温度梯度较小、凝固时间较长,有利于镍的聚集。提高溶液温度和加快连铸速度后,Cu、Ni的含量接近于名义成分,且Ni也均匀的分布于基体中,并得到成分均匀的铸坯。 |
英文摘要: |
Using metallographic analysis method to study the influence of continuous casting parameters on AgCu4Ni0.5 alloy solidification structure. The result shows that when both the solution temperature and casting speed are low, the solid-liquid interface temperature gradient of alloy is comparatively low and the solidification time is comparatively long, which is beneficial to aggregate nickel. Increasing the solution temperature and speeding up the continuous casting speed, the content of Cu, Ni were close to the nominal composition and Ni evenly distributed in the matrix and obtained the uniform composition casting billet. |
View Full Text
View/Add Comment Download reader |
Close |
|
|
|