Abstract
热处理工艺对Ag-Mg-Ni合金内氧化的影响
Effect of Heat-treatment Process on the Internal Oxidation of Ag-Mg-Ni Alloy
Received:July 15, 2016  
DOI:
中文关键词: 金属材料  Ag-0.3Mg-0.2Ni合金  内氧化  热处理  显微组织  显微硬度
英文关键词: metal materials  Ag-0.3Mg-0.2Ni alloy  internal oxidation  heat-treatment  microstructure  micro hardness
基金项目:
Author NameAffiliationE-mail
MA Xiaolong Xi’an Noble Rare Metal Materials Co. Ltd., Xi’an 710065, China ajwmxl@163.com 
YU Jianjun Xi’an Noble Rare Metal Materials Co. Ltd., Xi’an 710065, China  
LI Yongdi Xi’an Noble Rare Metal Materials Co. Ltd., Xi’an 710065, China  
ZHAO Tao Xi’an Noble Rare Metal Materials Co. Ltd., Xi’an 710065, China  
Hits: 3247
Download times: 3425
中文摘要:
      Ag-Mg-Ni合金的内氧化影响其显微组织和力学性能。研究了Ag-0.3Mg-0.2Ni合金在不同热处理条件下的显微组织和力学性能变化。结果表明,随着热处理温度增加,合金的显微硬度先降后升,金相显微组织由典型的纤维状特征转变为等轴晶;随着保温时间延长,晶粒逐渐长大,硬度提高;热处理温度在400℃以上时,Ag-Mg-Ni合金开始发生内氧化,升高温度能够加速内氧化过程,600℃保温6 h或800℃保温2 h可获得显微硬度(Hv0.02)在140以上的Ag-0.3Mg-0.2Ni。
英文摘要:
      Internal oxidation is very important for achieving desired microstructure and mechanical properties of Ag-Mg-Ni alloy. The microstructure and mechanical properties of Ag-0.3Mg-0.2Ni alloy were studied under different heat treatment conditions. The results indicate that the micro hardness of the alloy decreased first and then increased as the heat treatment temperature went up, accompanied by the transformation of the microstructure from typical fibrous structure to equiaxed grains. With the heat preservation time prolonged, the grains grew larger and the hardness was enhanced. When the heat treatment temperature exceeded 400℃, the internal oxidation of Ag-Mg-Ni alloy began to occur, and the oxidation process could be accelerated by raising temperature. Ag-0.3Mg-0.2Ni with a value of Hv0.02 more than 140 was yielded when heated at 600℃ for 6 h or 800℃ for 2 h.
View Full Text   View/Add Comment  Download reader
Close