|
贵州某黄金选矿厂弱酸性浮选工业试验 |
Commercial Application Test of Weak Acid Flotation Process on a Gold Ore in Guizhou Province |
Received:November 23, 2017 |
DOI: |
中文关键词: 有色金属冶金 弱酸性浮选 金矿 黄铁矿 工业试验 |
英文关键词: nonferrous metallurgy weak acid flotation gold ore pyrite industrial test |
基金项目:国家自然科学基金项目(51764021)。 |
|
Hits: 3065 |
Download times: 2501 |
中文摘要: |
贵州某金矿含金4.3 g/t,金主要赋存在黄铁矿中,矿石含碳较高,属难选难冶型金矿。为实现该金矿资源的高效利用,采用热压预氧化打开矿石中金包裹,提高金的浸出率,同时将原有的碱性浮选工艺调整为弱酸性浮选。采用“二粗二精四扫”的选矿流程,进行工业试验。通过条件试验确定磨矿细度及各作业的药剂用量,最终获得金精矿金品位19.34 g/t,回收率88.25%。与原工艺相比,弱酸性浮选可以利用废酸,节约碱性调节剂的使用。 |
英文摘要: |
A commercial application test of the weak acid flotation process was conducted on a gold ore from Guizhou Province. The ore has a gold content of 4.3 g/t and gold is mainly present in pyrite, but a high carbon content makes it difficult to be separated and extracted. The ore was first treated by the pre-oxidation under heat and pressure to expose the gold encapsulated inside the mineral, and then the weak acid flotation process was applied to extract the gold-containing sulphide ore. Under the given conditions of the fineness of the ore and the dosage of the flotation chemicals, a final gold grade of 19.34 g/t was achieved with a recovery of 88.25%, after two roughing and two cleaning and four scavenging operation. Different from the previous alkaline flotation process, the waste acid can be recycled during the weak acid flotation. |
View Full Text
View/Add Comment Download reader |
Close |